It’s Easy to Statrt Knife Making!

Constructing a knife personally at home from scratch is really exciting. Knife making process has numerous variables as well as many techniques to go about it.

All this is influenced by three aspects which are, kinds of tools you have, kind of knife you want and any kind of steel you want.

The following procedures will enable you to make your own knife in no time.

Tools required for Knife making

For a beginner, constructing a knife may seem as time-consuming and costly in finding the right tools. Well, this isn’t the truth as knives have been built for years without the existence of expensive tools and modern equipment. Here are the necessary basic tools to get you started in creating a knife at home.

(1) Files

Files are one of the most important tools in knife making. They have a major role while making a knife. They help you in making bevels on the blade making it impossible to have an alternative for this tool. There are two kinds of files to consider when acquiring them. Double and single cut files. A double cut file removes additional material to the tool compared to single cut file. A double cut file does the most work hence, used to do the most work while the single cut ought to be utilized for finer finishing jobs.

(2) Abrasives

Making blades needs the utilization of abrasives like sanding disc, sandpaper or a sanding belt. There are different brands of abrasives but you ought to find a sandpaper brand that you probably will use to the maximum. In the long run, this will help you cut down the cost allocated for abrasives.

(3) Steel

A fine knife is made from carbon steel. However, there are numerous grades and kinds of steel metal in the market. Stainless steel isn’t suitable to utilize as it is tough to handle as the blade may not be fine as it should be. The most common carbon steel used to make blades is 01 as it’s simple to soak when red hot.

(4) Hacksaw

The hacksaw is another basic tool that’s essential for making a blade. This tool is used to cut the steel metal into the shape of a blade. A lot of hacksaws in the market will actually get the job done as long as it’s not a cheap weak saw you picked up.

(5) Handle material

At this stage, you can pick any material to make the handle of your blade. Nevertheless, the easiest material for beginners is wood because it is easily attached to a screw. Wood is commonly used as it is easy to cut and shape.

Knife making

After gathering the basic tools, it’s time now to join them together to make a knife. Use the hacksaw, cut out a rectangular shape on your traced blade to detach it from the carbon steel. The hacksaw ought to cut the knife perfectly to the traced shape. Drill a number of same size rivet holes on the cutout blade. Use the acquired abrasives to sand out any sign of scratch on all areas of the blade to boost the quality and luster of the knife. The final stage of making a knife is heat treating a blade via a forge. Gas or coal forge is effective in heating the blade. Submerge your steel blade completely in

the forge bucket of motor oil for better results. After a few minutes of heating the blade, soak it in a hardening bath. After cooling the blade, attach the well cut out handle to complete the process.

How to test a knife for sharpness

Most people who make knives don’t check the sharpness of their blades. It’s good to test just how sharp your blade is.

Below are tips on how to test your knife’s sharpness.

(1) Paper test

This is the commonly used test because of its speed and easiness. You can utilize any piece of paper you come across. Use one hand to hold the paper and the other dormant hand to hold the knife. Cut through the paper applying the least pressure at a certain angle.

(2) Use of Thumbnail

Place your blade at 90 degrees angle perpendicular away from a thumbnail. Apply a little pressure when pressing it on your nail. A sharp knife ought to remain the same place it was placed.

Having a personal knife to cook or hunt is very important. A sharp blade is consistent and safer compared to a dull one. With the above procedure, you will make a knife in the shortest time possible. What are you waiting for!